Dulux Trade Quick Dry MDF Primer Undercoat
£47.57
1
£47.57
1
A water-based primer and undercoat for interior and exterior MDF projects.
Features
- A quick drying primer and undercoat for interior and exterior MDF surfaces
- Can be applied with a brush, roller or spray
- Quick drying and low odour
- Interior and exterior use
- Drying time: 2 hours
- Coverage: 13 m2
- Coats: 1
Overview
Overview
Dulux Trade Quick Drying MDF Primer Undercoat is a water-based primer suitable for use on interior and exterior MDF (Medium Density Fibreboard). Suitable for a wide range of projects.
Preparation
Preparation
For the best results, ensure surfaces to be primed are clean, dry and free of dirt, grease or wax before treatment.
- Thoroughly rub down previously painted surfaces then wipe off with a damp, lint-free cloth or vacuum all traces of sanding dust. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
- Clean down any areas of organic growth with Dulux Trade Weathershield Multi-Surface Fungicidal Wash
- Any surface defects should be filled with an appropriate filler
- Spot prime all nail heads with an appropriate metal primer
Application
Application
Always do a test area before starting any project to assess product suitability and compatibility of the finish. Follow the manufacturer's instructions on the tin at all times.
- Stir the thoroughly before and periodically during use, making sure to reach pigment in the top and bottom creases of the tin
- Apply 1 coat of Dulux Trade MDF Primer Undercoat with a good quality natural bristle brush, microfibre roller or spray system
- Allow to dry for 2 hours
Thinning
- Sealing new or bare surfaces: Add up to 1 part clean water to 5 parts paint
- Normal use (not to be exceeded): Add up to 1 part clean water to 10 parts paint
- Conventional spray application: Add up to 1 part clean water to 2.5 parts paint
- Airless spray application: Add up to 1 part clean water to 5 parts paint
Spray Recommendations
- Conventional Spray: Satisfactory through most equipment
- Airless Spray: A typical set up for airless spray application would be a minimum working pressure on paint of 133 bars (2000 lb/sq in) with a spray tip size of 0.43mm (17 thou) and a spray tip angle of 60 degrees
Finishing
Finishing
Once completely dry, finish Dulux Trade Quick Dry MDF Primer Undercoat with a suitable Dulux Trade topcoat.
Technical Specification
Technical Specification
Brand:
Drying time:
2 hours
Coverage:
13 m2
Coats:
1
Location:
Interior
Location:
Exterior
Size:
2.5L
Datasheets:
Suitable for:
LoungeDining RoomHallwayBedroomNurseryOfficeKitchenGarageGardenConservatoryPorchClassroomGames roomLoftCellarPlayroom
MPN:
5092094
GTIN:
5010212472729