Crown Performance Series Ceiling Paint
- A water-based emulsion for ceilings that hides imperfections
- Designed to drip less for easy clean-up
- Provides a matt, high opacity finish
- Quick drying
- Drying time: 3 hours
- Coverage: 25 m2
- Coats: 2
- Drying time: 4 hours
Crown Performance Series Ceiling Paint is a water-based matt emulsion for ceilings. Its high-performance formula is designed to cover hairline cracks and other impurities, achieving a solid, opaque, perfect matt finish in just two coats.
For the best results from Crown Ceiling Paint, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust, grease or any other surface contaminants. Clean the area with a mix of warm water and a mild detergent and allow to dry thoroughly, if necessary.
- Fill any larger holes, cracks or splits with a suitable filler, sand smooth and remove sanding dust
- New or bare surfaces, powdery plaster or dense surfaces should be painted with an appropriate sealer or a mix of emulsion and up to 40% clean water as a basecoat
- For previously decorated surfaces, remove all flaky, defective material and remove all traces of sanding dust with a slightly damp cloth
- Lightly abrade the surface for a key
- Treat any heavily stained areas with Crown Stain Block Primer
Always do a test area before starting any project to assess product suitability. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas. Do not apply Crown Performance Series Ceiling Paint in damp or humid conditions.
- Stir thoroughly before and during use, making sure to include pigment gathered in the top and bottom creases of the tin
- Apply 2 coats with a high-quality synthetic bristle brush or a roller. A roller is recommended for larger areas
- Allow 4 hours drying time between coats
When the time comes for a refresh, simply apply Crown Performance Series Ceiling Paint using the preparation and application steps above.